Kuriyama

Note: Call our Customer Service Department for availability of a specific style and size in aluminum, hard coat aluminum, brass, ductile iron, carbon steel, stainless steel, polypropylene, and nylon.

Part A: Male Cam x Female NPT

wdt_ID	Size	Part #
1	1/2"	50-A
2	3/4"	75-A
3	1"	100-A
4	1-1/4"	125-A
5	1-1/2"	150-A
6	2"	200-A
7	2-1/2"	250-A
8	3"	300-A
9	4"	400-A
10	5"	500-A
11	6"	600-A
12	8"	800-A
13	10"	1000-A

Part B: Female Cam x Male NPT

wdt_ID	Size	Part #
1	1/2"	50-C
2	3/4"	75-C
3	1"	100-C
4	1-1/4"	125-C
5	1-1/2"	150-C
6	2"	200-C
7	2-1/2"	250-C
8	3"	300-C
9	4"	400-C
10	5"	500-C
11	6"	600-C
12	8"	800-C
13	10"	1000-C

Part C: Female Cam x Hose Shank

wdt_ID	Size	Part #
1	1/2"	50-C
2	3/4"	75-C
3	1"	100-C
4	1-1/4"	125-C
5	1-1/2"	150-C
6	2"	200-C
7	2-1/2"	250-C
8	3"	300-C
9	4"	400-C
10	5"	500-C
11	6"	600-C
12	8"	800-C
13	10"	1000-C

Part D: Female Cam x Female NPT

wdt_ID	Size	Part #
1	1/2"	50-D
2	3/4"	75-D
3	1"	100-D
4	1-1/4"	125-D
5	1-1/2"	150-D
6	2"	200-D
7	2-1/2"	250-D
8	3"	300-D
9	4"	400-D
10	5"	500-D
11	6"	600-D
12	8"	800-D
13	10"	1000-D

Part E: Male Cam x Hose Shank

wdt_ID	Size	Part #
1	1/2"	50-E
2	3/4"	75-E
3	1"	100-E
4	1-1/4"	125-E
5	1-1/2"	150-E
6	2"	200-E
7	2-1/2"	250-E
8	3"	300-E
9	4"	400-E
10	5"	500-E
11	6"	600-E
12	8"	800-E
13	10"	1000-E

Part F: Male Cam x Male NPT

wdt_ID	Size	Part #
1	1/2"	50-F
2	3/4"	75-F
3	1"	100-F
4	1-1/4"	125-F
5	1-1/2"	150-F
6	2"	200-F
7	2-1/2"	250-F
8	3"	300-F
9	4"	400-F
10	5"	500-F
11	6"	600-F
12	8"	800-F
13	10"	1000-F

Part DC: Dust Cap

wdt_ID	Size	Part #
1	1/2"	50-DC
2	3/4"	75-DC
3	1"	100-DC
4	1-1/4"	125-DC
5	1-1/2"	150-DC
6	2"	200-DC
7	2-1/2"	250-DC
8	3"	300-DC
9	4"	400-DC
10	5"	500-DC
11	6"	600-DC
12	8"	800-DC
13	10"	1000-DC

Part DP: Dust Plug

wdt_ID	Size	Part #
1	1/2"	50-DP
2	3/4"	75-DP
3	1"	100-DP
4	1-1/4"	125-DP
5	1-1/2"	150-DP
6	2"	200-DP
7	2-1/2"	250-DP
8	3"	300-DP
9	4"	400-DP
10	5"	500-DP
11	6"	600-DP
12	8"	800-DP
13	10"	1000-DP

EZ Boss-Lock Fittings

No more fumbling with clamps, wire, clips or pins…Just close the handles and the locking mechanism is engaged!

Unlike other safety couplings:

The EZ Boss-Lock is extremely easy to open!!

The release lever is under your thumb when you want to open the fitting. ERGONOMIC.

The EZ Boss-Lock is resistant to accidental disconnection when being dragged.

The release lever opens in the direction opposite to the cam arm, so movements that tend to open the release lever also tend to close the cam arm!

The EZ Boss-Lock alerts you if it is not properly engaged.

If the rotating lever is not flush with the handle, it is not properly engaged.

The EZ Boss-Lock has no sliding pins to jam.

The EZ Boss-Lock’s rotating action helps keep the locking device free of debris.

The EZ Boss-Lock has no sliding pins to pop open.

The EZ Boss-Lock is designed to protect critical parts from impact and to withstand rugged use.

The EZ Boss-Lock can be supplied with special shanks custom suited to your needs

The EZ Boss-Lock is available with Swaged and PF shank designs, for hard to couple chemical hoses.

The EZ Boss-Lock is easier to insert into the hose tubes of Tank Trucks, and easier to use in restricted spaces.

This is due to the smaller maximum OD and a more snag free exterior.

The EZ Boss-Lock Cam Arm assemblies can be retrofitted onto undamaged stainless steel Boss-Lock

This allows you to protect your investment in stainless steel Boss-Lock couplings while you upgrade.

To Connect:

Open the coupler by pulling back on the locking lever above the cam arms while rotating the arms away from the body of the coupler.

Insert the adapter into the coupler.

Close the coupler by rotating the cam arms towards the body of the coupler. Locking occurs when the cam arms are closed. The coupler is properly closed when the locking levers on both cam arm assemblies are flush.

To Disconnect:

Open the coupler by pulling back on the locking lever above the cam arms while rotationg the arms away from the body of the coupler.

Remove the adapter from the coupler.

Close the coupler by rotating the cam arms towards the body of the coupler. By locking the coupler when not in use you will help to protect it from incidental damage.

Most important…the EZ Boss-Lock is made in the USA!

Reducing Cam and Groove Fittings

wdt_ID	Male Cam	Reducing Part A Female NPT	Part #
1	2"	1-1/2"	2015-A
2	2"	3"	2030-A
3	3"	2"	3020-A
4	3"	4"	3040-A
5	4"	3"	4030-A

wdt_ID	Female Cam	Reducing Part B Male NPT	Part #
1	1-1/2"	1"	1510-B
2	2"	1-1/2"	2015-B
3	2"	3"	2030-B
4	3"	2"	3020-B
5	3"	4"	3040-B

wdt_ID	Female Cam	Reducing Part C Hose Shank	Part #
1	2"	1-1/2"	2015-C
2	3"	2"	3020-C
3	3"	4"	3040-C
4	4"	3"	4030-C
5	6"	4"	6040-C

wdt_ID	Female Cam	Reducing Part D Female NPT	Part #
1	1-1/2"	1"	1510-D
2	2"	1-1/2"	2015-D
3	3"	2"	3020-D
4	4"	3"	4030-D
5	6"	4"	6040-D

wdt_ID	Male Cam	Reducing Part E Hose Shank	Part #
1	1-1/2"	1"	1510-E
2	2"	1-1/2"	2015-E
3	3"	2"	3020-E
4	4"	3"	4030-E
5	6"	4"	6040-E

wdt_ID	Male Cam	Reducing Part F Male NPT	Part #
1	1-1/2"	2"	1520-F
2	2"	3"	2030-F
3	3"	1-1/2"	3015-F
4	3"	2"	3020-F
5	3"	4"	3040-F

wdt_ID	Female Cam	Reducing Cam Male Cam	Part #
1	1"	1-1/2"	1015-DA
2	1-1/2"	1"	1510-DA
3	1-1/2"	2"	1520-DA
4	2"	1"	2010-DA
5	2"	1-1/2"	2015-DA

wdt_ID	Female Cam	Double Female Cam Female Cam	Part #
1	2"	2"	200-DD
2	2"	3"	2030-DD
3	3"	3"	300-DD
4	3"	4"	3040-DD
5	4"	4"	400-DD

wdt_ID	Male Cam	Double Male Cam Male Cam	Part #
1	1"	1"	100-AA
2	1-1/4"	1-1/4"	125-AA
3	1-1/2"	1-1/2"	150-AA
4	1-1/2"	2"	1520-AA
5	2"	2"	200-AA

150# ASA Flanged Cam Fittings

wdt_ID	Male Cam	Male Cam x 150# Flange 150# Flange	Part #
1	1"	1"	100-FLA
2	1-1/2"	1-1/2"	150-FLA
3	2"	2"	200-FLA
4	3"	3"	300-FLA
5	4"	4"	400-FLA
6	6"	6"	600-FLA

wdt_ID	Female Cam	Female Cam x 150# Flange 150# Flange	Part #
1	1"	1"	100-FLD
2	1-1/2"	1-1/2"	150-FLD
3	2"	2"	200-FLD
4	3"	3"	300-FLD
5	4"	4"	400-FLD
6	6"	6"	600-FLD

Note: As stated above, we distribute for several manufacturers of cam and groove fittings. Many other special cam fittings are available, such as:

Male or female cam fittings with API Tank Truck Flanges.
90 º cam fittings in many different configurations.
Cam fittings with Railroad Tank Car Connections (Straight and 45 º.)
Cam fittings meant for welding (Butt weld or socket weld to either tube or pipe.)
Cam dust caps with locking ears.
Cam hose fittings with special shanks for hoses with polyethylene (XLPE or UHMW) tubes.
Cam hose fittings specially made for swaging to hose.
Cam fittings specially designed for vapor recovery applications.
Cam fittings with Straight Pipe Thread for delivery of dry goods.

Cam and Groove Gaskets

Synthetic Rubber Gaskets

wdt_ID	Size	Buna-N	Extra Thick Buna-N	Viton ®	EPDM	Neoprene	White Buna-N	Silicone
1	1/2"	50-G-BU	50-G-THK	50-G-VI	50-G-EPR	50-G-NE	50-G-WB	50-G-SIL
2	3/4"	75-G-BU	75-G-THK	75-G-VI	75-G-EPR	75-G-NE	75-G-WB	75-G-SIL
3	1"	100-G-BU	100-G-THK	100-G-VI	100-G-EPR	100-G-NE	100-G-WB	100-G-SIL
4	1-1/4"	125-G-BU	125-G-THK	125-G-VI	125-G-EPR	125-G-NE	125-G-WB	125-G-SIL
5	1-1/2"	150-G-BU	150-G-THK	150-G-VI	150-G-EPR	150-G-NE	150-G-WB	150-G-SIL
6	2"	200-G-BU	200-G-THK	200-G-VI	200-G-EPR	200-G-NE	200-G-WB	200-G-SIL
7	2-1/2"	250-G-BU	250-G-THK	250-G-VI	250-G-EPR	250-G-NE	250-G-WB	250-G-SIL
8	3"	300-G-BU	300-G-THK	300-G-VI	300-G-EPR	300-G-NE	300-G-WB	300-G-SIL
9	4"	400-G-BU	400-G-THK	400-G-VI	400-G-EPR	400-G-NE	400-G-WB	400-G-SIL
10	5"	500-G-BU	500-G-THK	500-G-VI	500-G-EPR	500-G-NE	500-G-WB	500-G-SIL
11	6"	600-G-BU	600-G-THK	600-G-VI	600-G-EPR	600-G-NE	600-G-WB	600-G-SIL
12	8"	800-G-BU	800-G-THK	800-G-VI	800-G-EPR	800-G-NE	800-G-WB	800-G-SIL

Teflon ® Type Gaskets

Teflon ® envelope gaskets with Buna-N, White Buna-N, Viton ® or EPDM filler.
Teflon ® encapsulated gaskets with Silicone or Viton ® interior.
Teflon ® accordion gaskets.

Standard Handle Assemblies

wdt_ID	Description	Size	Brass P/N	Sintered S/S P/N	Investment S/S P/N
1	Handle and Pin	1/2"	50-HP-BR	50-HP-SP	-
2	Handle and Pin	3/4"	75-HP-BR	75-HP-SP	-
3	Handle and Pin	1"	100-HP-BR	100-HP-SP	-
4	Handle, Ring and Pin	1-1/4" to 2-1/2"	200-HRP-BR	200-HRP-SP	200-HRP-SI
5	Handle, Ring and Pin	3" to 5"	300-HRP-BR	300-HRP-SP	300-HRP-SI
6	Handle, Ring and Pin	6"	600-HRP-BR	-	600-HRP-SI
7	Handle and Pin	8"	800-HP-BR	-	-

Note: Please call our Customer Service Department for other Cam and Groove accessories, such as:

Special handles for locking dust caps and EZ Boss-Lock fittings.
Safety clips and lanyards for Boss-Lock fittings.
Jack chains and sash chains with S-hooks and pull rings.

Viton ® and Teflon ® are registered trademarks of DuPont Dow Elastomers

Page Title