The Ready Set Staple System

With the Ready Set Staple fastener system, an extended plate design separates the point of staple penetration from the line of belt flexing, thus eliminating splice fatiguing that results from sawing action at the point of attachment.

High tensile, stainless steel staple fasteners are furnished in strips with a bridge between each fastener plate. This strip design prevents individual parts from getting into the product being conveyed – eliminating a problem that may occur with some hook or teeth types of fasteners. The Ready Set Staples provide a strong splice, resistance to impact damage, and a smooth, unrippled joint that makes hinge pin insertion easier.

Ready Set Staples work between carcass fibers without severing them. Staples are hammer-driven through the belt, then clinched cross-wise to the belt, so that belt tension does not pull against the staples to unclinch them.

Staple Belt Fasteners

Applications

Metals Available

PIW (Pounds per inch Width)

Fastener Profile

Pulley Diameter

Range

Installation Method

Staple Fastener Selection Chart

wdt_ID Fastener # PIW Rating Belt Thickness Min. Pulley Diameter
1 RS62 100 1/16" to 1/8" 2"
2 RS125 160 1/8" to 3/16" 3"
3 RS187 200 3/16" to 1/4" 4"

Ordering Information

Complete Fastener Joint Ordering Numbers

Complete Fastener Joint Ordering Numbers

wdt_ID Belt Width With Nylon Covered Steel Cable With Steel Spring Wire With Stainless Spring Wire With Nylon Covered Stainless Cable
1 RS62 Plated Steel RS62 Stainless Steel
2 24" RS62J24NC - RS62SJ24SS RS62SJ24NCS
3 36" RS62J36NC - RS62SJ36SS -
4 48" RS62J48NC - RS62SJ48SS RS62SJ48NCS
5 60" RS62J60NC RS62J60SP RS62SJ60SS -
6 RS125 Plated Steel RS125 Stainless Steel
7 12" RS125J12NC - - RS125SJ12NCS
8 18" RS125J18NC - RS125SJ18SS RS125SJ18NCS
9 24" RS125J24NC RS125J24SP RS125SJ24SS RS125SJ24NCS
10 30" RS125J30NC RS125J30SP RS125SJ30SS RS125SJ30NCS
11 36" RS125J36NC RS125J36SP RS125SJ36SS RS125SJ36NCS
12 42" RS125J42NC - - -
13 48" RS125J48NC RS125J48SP RS125SJ48SS RS125SJ48NCS
14 60" RS125J60NC RS125J60SP RS125SJ60SS RS125SJ60NCS
15 RS187 Plated Steel RS187 Stainless Steel
16 12" RS187J12NC - - -
17 18" RS187J18NC - - -
18 24" RS187J24NC - RS187SJ24SS RS187SJ24NCS
19 30" RS187J30NC - RS187SJ30SS RS187SJ30NCS
20 36" RS187J36NC - RS187SJ36SS RS187SJ36NCS
21 48" RS187J48NC - RS187SJ48SS RS187SJ48NCS
22 60" RS187J60NC - RS187SJ60SS -

Note: Each carton contains four complete fastener joints with hinge pins and stainless steel staples.

Hinge Pins

Bulk Coils

For # RS62

wdt_ID Length Ordering #
1 Nylon Covered Steel
2 10' NC62-X
3 100' NC62-C
4 500' NC62-D
5 Nylon Covered Stainless
6 10' NCS62-X
7 100' NCS62-C
8 500' NCS62-D

For # RS125

wdt_ID Length Ordering #
1 Nylon Covered Steel
2 10' NC1-X
3 100' NC1-C
4 500' NC1-D
5 Nylon Covered Stainless
6 10' NCS1-X
7 100' NCS1-C
8 500' NCS1-D

For # RS187

wdt_ID Length Ordering #
1 Nylon Covered Steel
2 10' NC187-X
3 100' NC187-C
4 500' NC187-D
5 Nylon Covered Stainless
6 10' NCS187-X
7 100' NCS187-C
8 500' NCS187-D

10 Pin Packages

For # RS62

wdt_ID Length Ordering #
1 Steel Spring Wire
2 24" SP62-24
3 36" SP62-36
4 48" SP62-48
5 60" SP62-60
6 Stainless Spring Wire
7 24" SS62-24
8 36" SS62-36
9 48" SS62-48
10 60" SS62-60

For # RS125

wdt_ID Length Ordering #
1 Steel Spring Wire
2 18" SP1-18
3 24" SP1-24
4 30" SP1-30
5 36" SP1-36
6 42" SP1-42
7 48" SP1-48
8 60" SP1-60
9 Stainless Spring Wire
10 18" SS1-18
11 24" SS1-24
12 30" SS1-30
13 36" SS1-36
14 42" SS1-42
15 48" SS1-48
16 60" SS1-60

For # RS187

wdt_ID Length Ordering #
1 Steel Spring Wire
2 18" SP2-18
3 24" SP2-24
4 30" SP2-30
5 36" SP2-36
6 48" SP2-48
7 60" SP2-60
8 Stainless Spring Wire
9 18" SS2-18
10 24" SS2-24
11 30" SS2-30
12 36" SS2-36
13 48" SS2-48
14 60" SS2-60

The Staple Installation Tool

The RSC187 staple tool (pictured at the top of this page) accurately installs two staples simultaneously for quick, dependable splice installation. Numbers RS62, RS125 and RS187 fasteners are each installed with the Series RSC187 tool. Tools come complete with guide blocks and driver. RSC187 tools are available in a variety of sizes which allow varying amounts of belt width to be laced at one position. Tools can be moved rapidly along the belt as staples are installed. Tools, up to 24″ wide, speed splicing. Wider tools are available for production lacing and fabrication shop requirements.

Installation Tools

wdt_ID Length Ordering #
1 2" RSC187
2 4" RSC187-4
3 6" RSC187-6
4 12" RSC187-12
5 24" RSC187-24

Staple Kits

Everything you need to install, maintain and repair numbers RS62, RS125 and RS187 Staple belt splices. Lightweight, only 16.5 lbs. Kit includes a RSC187 installation tool, staple set plate, hand skiver, belt marker, belt nippers, and a 1 lb. hammer. All packaged in a durable metal box with plenty of room left over for other items.

Staple Kits

wdt_ID Description Ordering #
1 6" Installation Kit RSTK4-6
2 12" Installation Kit RSTK4-12